How to Remove a Blink Doorbell: Quick Release Steps with or Without the Key
By Sophia Al-Mansoor
Most homeowners discover they need to open their doorbell eighteen to twenty-four months after initial installation, right when the factory key has vanished into a junk drawer. You do not need to order a replacement bracket assembly from Amazon to get inside.
A heavy-gauge paperclip alternative tool is the most reliable substitute. Standard thin paperclips will bend under the tension of the internal spring, so select a heavy-duty vinyl-coated or large metal paperclip. Straighten one leg completely, leaving the curved end as a handle. Insert the straight wire tip into the center of the bottom release slot. Push straight upward against the plastic spring while lightly pulling the base of the camera outward with your opposite hand.
A jeweler's flathead screwdriver measuring between 1.5mm and 2.0mm serves as another effective replacement. Slide the flat blade horizontally into the bottom slot, keeping it parallel to the wall to prevent gouging the plastic walls of the aperture. Push inward until you meet the latch edge, then rotate the screwdriver handle slightly to push the tongue upward.
Avoid using thick flathead screwdrivers or pointed sewing needles. Wide screwdrivers fracture the outer lip of the release slot, while thin needles can slip off the plastic tab and scratch internal wiring traces or puncture moisture seals.
Sophia analyzes international trade, startup ecosystems, retail transformation, and supply chain logistics for modern digital publications.
